基于移位原理的顺序控制器研究

本文根据PLC顺序控制程序的设计思路,阐述了用常用集成数码移位寄存器、电力电子开关电路和少量外围电子元件构成移位控制器的原理,根据此设计思路制作的移位控制器经过在实验室环境下运行,证明了设计方案的可行性。     

基于WebGIS的粗泥沙集中来源区电子地图系统研究

基于WebGIS的粗泥沙集中来源区电子地图系统建设，以粗泥沙集中来源区作为研究区域，以黄河中游粗泥沙集中来源区水土保持工作流程（包括规划设计、计划管理、综合治理、预防监督和淤地坝管理等）为主线，依托黄河流域水土保持生态与环境监测系统网络、黄河流域水土保持监测系统数据库，建立覆盖黄河流域、黄土高原区、多沙粗沙区、粗泥沙集中来源区，面向不同水土保持管理层的水土保持监测与管理信息系统。     

Measurement System of Uniformity between Breech Horizontal Platform and Datum Tube Axis of Rocket Artillery

The purpose of this development is to detect the parallelism between the breech horizontal platform and the datum tube axis of the rocket artillery. The located aiming mechanism at the muzzle and located adjustment mechanism at the breech are designed in the system. Besides those, the system also uses an autocollimator with accuracy of 1″ and a collimating mirror together to determine the axis of the datum tube. An electronic level with accuracy of 2″ is employed to measure and display the value of the included angle and the parameter of the inclined direction. The entire accuracy of this system is σ≤± 9.1″. This paper describes the composition and the operating principle of the system and analyzes the accuracy. The development of this system supplies reliable measurement method for new rocket artilleries and artilleries, and this technology is of a good application prospect.     

ispLSI1032E器件及其应用

介绍了Lattice公司的大规模集成电路ispLSI1032E,它是一种在系统复杂可编程逻辑器件(CPLD),借助于EDA设计软件可以随时更改芯片的功能,而且不需要改动印制电路板(PCB)的结构,大大提高了系统设计的效率,并保证了设计的正确性。最后设计了基于该芯片的EDA教学实验系统。     

用ADT14设计的新型电子温控器

ADT14是一种可编程温度监控器电路，可广泛应用于各种控制系统中进行温度检测和控制。用ADT14设计的新型电子温控器具有结构简单，安装方便，温控准确等优点。     

喷墨打印机的使用与维护

介绍使用喷墨打印机应注意的事项，探讨打印机墨水消耗过快的问题。     

电子封装用金属基复合材料的制备

分析了电子封装用金属基复合材料的性能特点及其对制备工艺的要求，在此基础上论述了该种材料的各种制备工艺的特点及发展现状。     

EWB应用于模拟电路分析的研究

介绍了将EWB用于“模拟电子技术”的课堂教学时，虚拟实验测量结果与理论计算值不一致时，如何去分析并解决问题。     

Neutral poly(3,4-ethylenedioxythiophene-2,5-diyl)s: preparation by organometallic polycondensation and their unique p-doping behavior

Neutral and non-doped poly(3,4-ethylenedioxythiophene), PEDOTh(Ni), and its hexyl derivative, PEDOTh-C₆(Ni), have been prepared by organometallic dehalogenation polycondensation of 2,5-dichloro-3,4-ethylenedioxythiophene and its hexyl derivative with a zerovalent nickel complex. PEDOTh-C₆(Ni) was soluble in organic solvents and ¹H NMR data indicated that it had an M_n of 11,000. MALDI-TOF mass analysis of PEDOTh(Ni) gave M_n and M_w of about 1700 and 2400, respectively. PEDOTh-C₆(Ni) showed a UV-Vis absorption peak at 546 nm in CHCl₃. Electrochemical oxidation of PEDOTh-C₆(Ni) started at about −0.40 V vs Ag⁺/Ag and gave a peak at 0.20 V vs Ag⁺/Ag. Chemical and electrochemical oxidation (or p-doping) of PEDOTh-C₆(Ni), both in solutions and in a solid state, led to weakening of the original π-π^∗ peaks and rise of new peak(s) in a region of 800-1500 nm. The p-doping of PEDOTh-C₆(Ni) caused not only a decrease in the intensity of ¹H NMR signals of the bridging ethylene hydrogens but also a decrease in that of the hexyl side chain, suggesting a strong interaction of the p-dopant with the side chain. NMR data of poly(3-methoxythiophene-2,5-diyl) also supported an assumption that p-doping brings about a severe change in electronic state of the substituent attached to the polythiophene main chain. PEDOTh(Ni) had a density of 1.71 g cm⁻³; the molecular packing mode of PEDOTh(Ni) is discussed based on the density of the polymer and its XRD data.     

地域通信网的干扰技术研究

本文在分析地域通信网结构及组成的基础上,研究了对地域通信网实施的节点破坏、末端信息封锁、局部阻塞瘫痪等对抗方法,并使用干扰地域通信网的程度、节点干扰率、末端节点封锁率和传递信息误差率等指标对干扰效果进行评估。